Feedback
JS Launch Condair FF2 High Pressure Spray Humidifier

JS Launch Condair FF2 High Pressure Spray Humidifier JS Humidifiers is launching the Condair FF2 high pressure spray humidifier, capable of delivering up to 1,080kg/h of moisture to a duct or air handling unit. The Condair FF2 is ideal for AHUs that have multiple humidification and adiabatic cooling elements as a single pump station can feed nozzles grids in up to four different ducts.

Even at maximum output, the low energy humidifier will only consume 3.2kW of power while delivering a potential 745kW of adiabatic cooling.

The Condair FF2 consists of a high pressure pump station that feeds water to a grid of atomising nozzles located inside a duct that are spraying towards a droplet eliminator.

The airstream absorbs the mist after about 0.8m to 1.3m with the remaining droplets being removed from the airstream by an evaporative matrix. As water flows down this particle free matrix it is absorbed by the air passing through, thus increasing humidification efficiency and reducing waste water.

As the pump station can feed nozzle grids in multiple ducts, the Condair FF2 can humidify incoming fresh air whilst also feeding a nozzle grid that is cooling exhaust air. By using adiabatic cooling on the exhaust air a thermal recovery system can use the reduced temperature to pre-cool incoming fresh air. This makes the Condair FF2 a more economical alternative than employing multiple humidifiers to achieve the same result.

The complete system has a relatively low pressure drop on the airstream of around 45Pa and is quiet in operation. It has a hygienic design and has been VDI6022 approved. Drain and flush cycles ensure that no water can remain in the system during periods of non-operation.

The spray nozzles are made from stainless steel and have a ceramic insert that provides a wide spraying angle for more rapid absorption and efficient humidity control. The humidifier can achieve ±4%RH.

As the nozzles come ready mounted onto a grid manifold, the complete system is very quick and easy to install.

JS Humidifiers is the UK’s largest humidification company with the widest range of products and offers a service of advice, design, supply, installation and maintenance. It also offers a comprehensive range of humidifier spares, not only for JS equipment but also for a large range of different manufacturers’ humidifiers, mostly available ex-stock.

Click here for more information on the Condair FF2 High Pressure Spray Humidifier